Home > Injection Molding Solution >

OEM Hot Runner Typical Injection Molding Defects Analysis And Solutions

Product Categories

Injection Molded Parts [44]
Plastic Molded Parts [34]
Precision Injection Molding [54]
Precision Hardware Parts [28]
Die Casting Parts [40]
Die Casting Mold [11]
Silicone Rubber Parts [15]
Silicone Injection Mold [1]
Telecommunication Parts [16]
Plastic Injection Molding Medical Parts [14]
Household Appliance Parts [17]
Electronic Spare Parts [34]
Molding Car Parts [14]
Injection Molding Solution [17]

Sun On Plastic Moulding Limited

Contact Now

OEM Hot Runner Typical Injection Molding Defects Analysis And Solutions

Ask Lasest Price
Price :	Negotiable
Payment Terms :	T/T
Supply Ability :	More than 1 million
Delivery Time :	30day
Brand Name :	OEM
Certification :	ISO

Add to Cart

Product Details
Company Profile

OEM Hot Runner Typical Injection Molding Defects Analysis And Solutions

The Cause And Countermeasure Of Product Leaving Marks

Current Ripple

When the material in the mold is solidified and the molten material after the flow is mixed, such as Mi is not fully integrated, there will be dim and scaly in the product. Iridescent or ring shaped, this phenomenon is the flow mark, usually occurs at a slow speed

	Cause	Cuntermeasure
Forming condition	1. The material overflow degree is too low, and the front section is very easy to cure 2. Mold temperature is too low 3. The speed of chaos molding is too fast or too slow, which will produce ripple flow marks when it is too slow and jagged flow marks when it is too fast 4. The filling pressure or holding pressure is too low, so that the flow mark is clear show	1. Increase the molding temperature 2. Increase die temperature 3. Set the right speed 4. Increase filling and retaining pressure
Die	1. The gate is too small 2. No cold feed well 3. Improper pouring U position	1.F pour n 2. Open more cold feed Wells. 3. If pouring U is not fixed, the material will also touch the position of trapping mold hole wall
Product Design	1. Product structure design makes more right angles 2. The product is broken and the thickness difference is too large	1. Improve product shape and smooth molten material flow 2. Change the design to make the thickness too smooth
Material	1. Poor liquidity of materials 2. Too much filler	1. Improve liquidity 2. Switch to materials with fewer fillers
Other	Blockage of suona on injection molding machine	Clean the nozzle of the machine

Product Tags:

typical injection molding defects analysis and solutions

OEM hot runner solutions

hot runner solutions OEM

OEM Hot Runner Typical Injection Molding Defects Analysis And Solutions

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Sun On Plastic Moulding Limited
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!